HTMS SUBMERSIBLE HYDRO-SOLIDS PUMP
• Coal slurry
• Iron oxide slurry
• Mill scale
• Water and slag
• Grit
• Clay slip
• Raw sewage
• Most mine slurries
• Plant effluent
• Plant sewage and sludge
• Clarifier sludge
• Textile mill effluent
• Drainage
• Black liquor
• Filtrate
DESIGN FEATURES
● Casing – Rugged one-piece casing designed
to facilitate the flow of all types of solids and
fibrous materials. CR 28% standard material of
manufacture.
● Fully recessed impeller – Will allow large,
stringy or fibrous material to pass through
the pump without binding or clogging. Also
ensures extra wear life. CR 28% standard
material of manufacture.
● Materials of construction – 28% chrome-iron,
CD4MCU, SG1, SS316.
● Casing bushes – Bolt on area for a guard to be
attached to allow correct solid size through and
provides stability on the sump floor. (Guard not
shown)
● Heavy duty shaft – Large diameters to handle
high loads and reduce shaft deflection.
● Mechanical seals – Silicon / silicon;0 tungsten
carbide.
CAPABILITIES
PERFORMANCE
● Temperatures to 90ºC.
● Pressures to 1 380 kPa.
● Solids to 150mm.
● Smaller models handle up to 1.8 S.G.
● Larger models handle up to 1.5 S.G
● Designed to handle large / stringy & abrasive
solids.
● Capacities to 636 m³/h.
● Heads to 28m at 1450 4 pole speed.